Lab-Filter für Sonderfarben

Dieser Abschnitt ist momentan leider nur auf Englisch verfügbar. Bitte entschuldigen Sie die Unannehmlichkeiten.

Lab filter for spot colors

When looking for details on available spot colors — such as Lab values, separation details, or out-of-gamut information — you can access them from the spot color set details under Resources > SpotColors. The spot color interface is not only comprehensive, but also helps you preventing unwanted duplicates with the included Lab filter: search by a spot color's current Lab or target Lab and find the closest match for your printing process easily.

Prevent duplicates and filter spot colors quickly by Lab.

Filter spot colors by Lab value

The Lab filter is available for every spot color resource. You can use it to either filter colors by current Lab or target Lab, and you can define a Delta E limit for the search results.

  1. Open the Resources tab.
  2. From the Resources menu, select the SpotColors.

  3. Double-click on the spot color set in which you want to search for the spot color.
  4. Click on Lab Filter to open the Lab filter.

  5. Select if you want to search by Current Lab or Target Lab.
  6. Enter the values for L*, a*, and b*.
  7. Under Show values below, enter the Delta E limit for your filter search.
    All colors with a Delta E higher than the entered value will not be shown in your filter results.
  8. Click on Apply to apply the search filter.

Please don't forget to reset the filter by clicking on Reset (8) after inspecting all search results.