Roland VersaCAMM VS/VSi Series

The VersaCAMM VS/VSi printer series, developed by Roland, enters the printing market with powerful print and cut inkjet printers designed for high quality package mockups and short-run production. With the capability to print CMYK, Light Cyan, Light Magenta, White and Metallic ink, at resolutions up to 1440 dpi, these printers allow for unmatched versatility and remarkably rich special effects, offering a whole new metallic color palette.

Ready-to-use color managements sets

GMG provides ready-to-use proof standards and calibration sets for VersaCAMM VS printers for the following print media:

  • Coated vinyl white self-adhesive foil: Roland SCM-GVWG
  • Transparent PET film: Solvent Clear Film
  • Coated Paper: TriSolv Paper 3684

Custom color management sets

If you want to use a different print medium, you first need to add the print medium in the Database view (Database > Media). You can then proceed to the next step and create a calibration set and a proof standard for the new printer-medium combination.

All these steps are explained step for step in our printer-specific Starter Kits which are available in the Support Area of our website.

Custom media should be thoroughly tested before use to ensure optimum quality. Though solvent ink printers can technically print to uncoated media, it is recommended to use specially treated media to enhance color and quality.

See also:

  • GMG-ColorProof-5_StarterKit_Roland VersaCAMM_en.pdf

Special inks (white, metallic, and clear inks as supported by the printer) are handled as spot colors in GMG ColorProof (unless you are using an MX profile with white ink information which allows you to map the image white channel to the profile white channel). You can fine-tune the behavior of the spot color channel by adjusting the Area Coverage or by using a spot color gradation (sfg) file. You can also control the color composition by defining the tonal value and opacity of each ink, for example defining the amount of metallic ink used in a spot color.

See also:

With the integrated cutting technology, these printers offer a one-step operation which is also supported in GMG ColorProof. This way, you can create mockups already cut into shape.

See also:

Due to the Intelligent Ink Circulation System, the white and metallic ink are circulated every eight hours to keep the tube system in the printer clean. The cartridges, however, still need to be shaken prior to use or when prompted by the printer to achieve homogeneous print results.